Welcome to contact:
Outdoor Stop Traffic Sign Board Road Traffic Steel Plate Direction
(1), materials. The main components are made of Q235B, and the
mechanical properties and chemical composition of the base are in
accordance with the requirements of "Low Alloy Structural Parts"
(GB / T1591).
(2) Welding materials. For manual welding, E43XX electrode is used,
and the basic performance should meet the requirements of "Carbon
Steel Electrode" (GB / T5117-95).
(3) Bolt materials. Ordinary bolts are all grade C. Bolts, nuts and
washers should be made of Q235 steel specified in "GB700-88".
(4) Reflective film purchase 3M engineering grade film. When using
reflective film to stitch the logo pattern, there should be a 3-6mm
heavy part at the splicing place. The reflective film is pasted on
the surface of the extruded profile, the minimum length of the
lower and lower edges protruding is 8mm, and it should be closely
adhered to the upper and lower edges.
(5) Structure production. Steel structural members shall be
manufactured in strict accordance with "GB50205-95", and the
surface of metal members shall not be damaged by scratches,
(6) Before the component is cut and processed, 1: 1 stakeout must
be carried out, and construction can be carried out without error.
Before the steel is processed, it should be straightened.
(7) Welding requirements, drilling, punching and workshop welding
should be completed before steel plating. For factory splicing
welds of component main materials, all joint welding shall meet
secondary welding quality standards. When welding, a reasonable
welding sequence should be selected to reduce the welding stress
and welding deformation generated in the steel structure, or use
preheating, hammering and other effective methods to achieve the
same purpose. For fillet welds, the size hF of the fillet is equal
to the thickness of the thinner component, the length of the weld
is equal to the length of the component, and full-welding is
Product introduction: Parking spaces indicate the areas where motor
vehicles are allowed to park. It needs to be used in conjunction
with the parking space line. When there is a vehicle type, time or
time limit, it can be indicated by auxiliary signs.
Product introduction: Parking space signs for a limited time;
indicates that motor vehicles can only be parked during the time
allowed by the sign, and parking is not allowed at other times. It
needs to be used in conjunction with the marking of parking spaces
for motor vehicles.
Product introduction: Taxi-only parking space sign; indicates that
only taxis are allowed here. It must be used in conjunction with a
taxi parking line. When there is time or duration limitation, it
can be indicated by auxiliary signs.
Product introduction: Handicapped parking space signs; indicates
that only vehicles driven by disabled people are allowed to park
here. It must be used in conjunction with parking spaces for the
disabled. When there is time or duration limitation, it can be
indicated by auxiliary signs.
Name: Anti-cursive sign can be customized according to customer
Please contact customer service staff or call: 18323483992
Material: reflective film + aluminum plate (customizable)
Specifications: Diameter: 300/400/500/600/800/1000 / 1200mm Round
card side length: 400 * 600/600 * 800/600 * 1200/800 * 1200mm
Square card side length: 700/900/1100 / 1300mm Triangle. Common
specifications and other specifications can also be customized
thickness: 1. 0/1. 2/1. 5/2. 0/3. 0mm thickness: 1. 0/1. 2/1. 5/2.
0 / 3. 0mm thickness: 1. 0/1. 2/1. 5/2. 0/3. 0mm
Warm reminder: dear, part of the product is made using current
processing and customization. Because it cannot be resold, it will
not be returned. Customers are cautioned to place orders